Atlas Baseplate 8,000lb. Capacity 2-Post Lift The Atlas® BP8000 is a baseplate two-post lift designed for low ceiling garages. The total column height of 108 inches or 9 feet allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 foot 3 inches. The BP8000 also has many of the popular features found on larger more expensive lifts, including a single-point lock release, Super-symmetric arms, and a twelve piece truck adapter set. Features 8,000 lb. Capacity Hobbyist Grade Lift – Not intended for heavy commercial use Baseplate, Open-Top Style Lift 3-Stage front arms/2-Stage rear arms Automatic Arm Restraints Single-Point Lock Release Double Safety Lock System Dual Hydraulic Chain-Drive Cylinders Free 12 Piece Truck Adapter Set Mounting Hardware Included Shipping Weight: 1,300 lbs. 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only Specifications Atlas® ATTD-BP8000 Specifications Capacity 8,000 LB. Overall Height 108" (9’) Overall Floor Width 132" (11’) Outside Column to Outside Column 124" (10’ 4") Maximum Lift Height (Without Adapters) 75 1/2" Maximum Lift Height (With Adapters) 86 1/2" Minimum Arm Height 4" Inside Column 109 1/8” (9’ 1 1/8”) Drive Thru 99” (8’ 3”) Column Size 7 1/4" x 11" Column Thickness of Steel 6mm Base Of Lift 17 1/2" x 17 3/4" Motor/Electrical Requirement 220 volt single (1) phase.A 30 amp breaker is recommended Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED) Shipping Weight 1,300 LBS. Adapter Heights 4 Each 2”, 3”, 6” Arm Hole/Adapter Peg Size 1.5” Requires a minimum of 4" of concrete with a 3000 psi. rating Documents Atlas® BP8000 Manual Atlas® BP8000 Cylinder Bleeding Procedure (Do this immediately after installation)